When you live or work in an environment where there is electricity, this electricity doesn’t stay in the wiring it is radiated out into the room. It seeks the path of least resistance to return to ground.Dirty electricity can be defined as high-frequency voltage pollution, called harmonics and transients, on electrical wiring. In layman’s terms, it means things like cell phone chargers, TVs, computers, dimmer switches, compact florescent bulbs, surge protectors etc cause an interruption of electrical current flow which introduces harmful intermediate frequencies into your electrical system.
The GS meter measures these harmonics and transients present within the 4 KHz to 100 KHz frequency range.The manufacturers of the GS filter recommend adding filters if your GS levels are above 50. An even more prudent approach is to have your electrical system evaluated by a professional before installing GS filters.
Ground Current (GC) also known as “stray voltage”: transmission lines and faulty wiring problems.
Magnetic (low frequency):
Because the electricity system works on the principal of balance, one of the most common causes of high levels of magnetic fields, is when the phase and neutral wires are not put together. When wired properly the positive cancels out the negative. If the phase and neutral wires are separated its extremely likely that high levels of EMFs occur. For magnetic fields the BioInitiative Report 2012 recommends a limit of 1 mG.
Microwaves as a subcategory of RF radiation operating at frequencies ranging from about 1 GHz upward. The Institute for Building Biology & Ecology (IBE) has spent years educating people on creating healthy homes and recommends no more than 9 microwatts per square meter (µW/m²), or .061 V/m of RF in our sleeping spaces.
⚡ Electric Field: 0.0001 V/M
International Appeal to Stop 5G on Earth and in Space.
Who is behind the Appeal
- education to the public concerning electromagnetic pollution (electrosmog)
- advocacy for an electromagnetically cleaner environment
- support for individuals disabled by radiation from wireless technology and other sources
A History of Electricity and Life
1) Eliminate compact fluorescent 🔗
2) Replace your mattress. 🔗
3) Measuring Body Voltage 🔗
“The body acts like an antenna for ambient electric fields in the home and builds up electric tension against the ground which interferes with numerous biological and physiological functions…. Since our neurons operate at voltages between 80 and 120 milli Volt (mV), the threshold at which artificially induced body voltage interferes with our normal physiology is at a level at or above 80 milliVolts. The higher the body voltage, the worse[it is]”.
- Reduce your AC body voltage, i.e. that which is man-made and unnatural
- Increase your DC body voltage, thereby increasing your exposure to the earths beneficial natural electrons.
With the DC voltage body test the effect of earthing should be just the opposite. That’s to say that the DC voltage reading should be higher when you are grounded than when you aren’t grounded, indicating that you have a better contact with the natural electrons from the earth. When I first did this test I obtained an ungrounded reading of 0.003V and a grounded reading of 0.21V.
A possible downside to the practice of earthing is exposure to ground currents, or stray voltage.
3) Avoid using your cell phone in a moving vehicle. In a moving vehicle your cell phone antenna is constantly scanning to maintain contact which means it is working at maximum signal strength.
4) You can now “wire” (plug in) your iPhone or iPad, using adapters 🔗
1- Earthing and Grounding Clips, Cords and Connectors (FAQ: When to Ground?), body voltage :
1 - Our recommended meters doing a home/office EMF survey:
C) Another store
📶 Effects of EMF on animals 📶
📶 EMF spanish organizations : 📶